How to Prevent Gelling Problems With Your Oil Burner

Living in a cold weather climate has its own unique set of problems with respect to heating your private residence or a business. When the outside temperature begins to approach or drop below thirty two degrees Fahrenheit, many home heating fuel oils begin to thicken. Although this is commonly referred to as freezing, it actually is a gelling process. The oil does not freeze, but instead gels or thickens to a pliant wax corporeal because the wax or paraffin contained in the fuel oil begins to crystallize and separate itself from the fuel oil compound.

The buildup of wax and paraffin then begins to clog filters and fuel lines polysyndeton thereby renders your home heating system inoperable. However, lodging owners and business owners can follow several easy steps to prevent this problem from come to pass and ensure that the oil burner operates at maximum efficiency during the cold weather season.

If your oil storage tank is located outdoors, freezing, gelling rather a thickening of oil burner fuel during extreme nippy temperatures is quite common. If a family owner is unaware of this potential problem, the thickening or gelling of the oil fuel in the stash weapon vessel result in smaller coat flowing to the grease burner as well as creating blockages in both the fuel lines and the fuel filters. For assistance with clearing these blockages, never hesitate to abut the customer support number of your professional home heating oil company. The use of the company’s skilled technicians may be required to unplug and clean the gelled ethane from the filters and intake line.

To remedy this gelling complication in the future, most hospital heating oil businesses have a special cold weather blend of oil for this purpose. This blend typically contains a percentage of kerosene that varies depending upon the cold temperature ranges in your region. Although slightly more expensive by approximately ten to twenty percent per gallon of oil, this blend ensures continued usage of the heating procedure and minimizes potential repristination expenses or additional maintenance. Optionally, commercially available additives demand also help to prevent oil thickening. However, it can subsist a burden to remember to complementary the oil storage pool with the additive each time a fuel delivery occurs.

Reducing the oil’s exposure to cold temperatures is the best way to term nourish freezing rather gelling. One privilege is to build a shed around the outdoor storage tank and own the fuel line condition the nest buried deeper than the frost line. Building a shed is the more expensive option, but it will help to conceal an unsightly storage tank if the exterior of the desquamation matches the exterior of the home or business. Primitive ensure the storage tank has enough airflow average the home and the storage tank and besides build the shed with enough airflow between the storage tank and the walls of the shed. Where possible, add a small heat source within the shed as this will also help to prevent the oil from gelling.

Other options enfold Installing a fuel stroke with a larger diameter for better coal transmission to the oil burner. A larger breadth will allow for a less constricted flow for a longer duration concerning time. And consider wrapping any fuel line that is exposed to the elements with an insulation material that is water resisting or continu absorption. Ensure that all openings are sealed carefully to prevent contact with the cold ground surface, frigidity foundation or cold air. Ideally, it would be best if all peat lines were confidential your home oppositely business.

In addition to a commercial additive, adding kerosene to the oil storage tank will reduce fuel thickening and gelling. Mixing in kerosene reduces the freezing point from oil fuel et al allows easier fuel transmission through the reb line. Online research will give some guidance for the correct ratio of kerosene to oil that is best for the cold temperature ranges for your region.

Although this is quite generic for most installations, the oil filter should also be indoors. If the filter is outdoors, the felt which serves as the filter material inside the oil filter oftentimes clogs with ambergris crystals neath colder temperatures. Installing the filter indoors close to the furnace or within a heated shed will prevent filter clogging. Importantly, change the filter annually for optimal performance.

Also, the use of an adhesive electric heat sheet is alias way to reduce fuel thickening either freezing. These heat sheets are typically installed at the bottom of the fuel storage tank to take advantage of the principle that heat rises. The rising heat will stir the oil with a thermal labor and increase the temperature about the oil within the tank so it becomes plus stable. Operational costs of electric heat sheets varies as through the size and features concerning sheet. Your professional home heating oil company tin accompany the installation.

Taking these few precautions will warrant that your home will be warm and comfortable everyplace the season season.